SS / Metal Filter Cartridges

Engineered Excellence, Elevated Life: SS/Metal Filter Cartridges – The Strength Behind Pure Process.

Stainless Steel Wire Mesh Filter Cartridges

Aarvi Energy IF filter is a wounded depth filter, with end caps, inner and outer guard made  from stainless steel. Consisting of a 3-dimensional borosilicate depth media, the IF Filter achieves  a void volume of 95%, ensuring a high containment capacity at high flow rates and low differential pressure. During operation,  the filter achieves a retention  rate of > 99.99998% related to 0.01 µm.

Application

\

Catalyst recovery and retention

\

Gasification and chemical production

\

Pharmaceutical powder recovery

\

Steam

\

Vent filters

\

Agrochemical

\

Polymer melt

Filter Cartridge Dimensions

Diameter : 66mm (2.6″)

Lengths : 5” (125 mm) , 10” (250 mm), 20” mm), 30” (745 mm) , & 40” (1012 mm)

Filtration Area  (per 10″ length)

Pleated Filter cartridge : 0.13 M2

Cylindrical Filter cartridge : 0.05 M2

Micron Rating : 3, 5, 10, 20, 25,50, 70, 10

Features

\

High filtration accuracy based on the wire mesh

\

Low differential pressure

\

High pressure resistance and excellent toughness

\

High heat resistance based on the characteristic of stainless steel range of use temperature in oxidative atmosphere -269℃ – 600℃

\

Excellent corrosion resistance based on the characteristic of stainless steel

\

Excellent cleanability and long-term reuse due to the typical surface filtration

\

High viscosity liquid filtration such as polymer and adhesive

\

Hot fluid filtration

\

Oil filtration such as the lubricant and the turbine oil

\

Fluid food filtration such as the juice, the cooking oil and the vinegar

\

Dehydration of sludge, food, etc.

\

Plain square weave for simple sieving duties through various weave patterns (Reverse Plain Dutch, Broad Mesh Twill and Single Plain Weave) to Dutch Twill Weave to provide for the most comprehensive selection of surface filtration duties.

\

Good permeability.

\

High tensile strength.

\

Available from single wrap designs through to complex multi-layered structures in pleated constructions to optimize the area available.

\

Some meshes available in a diffusion bonded versions to increased performance security of pore shape and size.

\

Available in the broadest range of pore sizes of any filter media type.

\

Available in 316L stainless steel as standard with other alloys such as 304L stainless steel, Inconel®, Hastelloy® and Monel®.

Stainless Steel Sintered Filter Cartridge

 stainless steel sintered cartridges are made of multiple layers of sintered stainless-steel mesh, which is applied to a stable supporting cage. Shifting the various sintering filter layers against one another is not possible, which results consistent, reproducible results of filtration. Depending on the Topmesh or Absolta mesh are used for the production. The filter cartridges are regenerative and can be easily cleaned by various methods (backflushing, with high-pressure, ultrasonic or acid bath.) they are used especially at high temperatures, at high viscosities or corrosive media. Stainless steel is supplied with DOE end-caps or common adaptors.

Stainless Steel Sintered Powder Filter Cartridges

Stainless Steel sintered powder filter cartridges are recommended for the filtration of Process Chemical / liquid at higher operating temperatures & corrosive environment. Sintered Stainless Steel cartridges are produced by cold isostatic pressing, which gives high porosity to the material and also stability. They can easily be cleaned or back washed thus having longer shelf life. Sintered filters are able to withstand high differential pressure across the filters.

Advantages / Features of SS Cartridge Filter 

\

100% Stainless Steel Construction

\

No Possibility of media migration

\

Superior Chemical Compatibility

\

Temperature range up to 350 ° C

\

Withstand differential pressures up to 150psi

\

Excellent Mechanical Strength

\

High Thermal Tolerance

\

Repeatedly Regenerable

\

Compatible with most corrosive fluids

Specification of  Sintered Cartridge Filter 

\

Material of Construction : SS 304, SS 316L,

\

Filter Length : 10” , 20”, 30” & 40 “

\

Filter outside Diameter : 64 mm

\

Particle Removal Ratings : 0.5, 1, 3, 5, 10, 20, 25, 50 , 74 & 100 micron

\

Type : Double Open End , Single Open End

\

Gasket : PTFE / Viton / Silicon

Open chat
Scan the code
Hello
Can we help you?