High Flow Filter Cartridge
High Flow Filters: Because You Deserve Crystal-Clear Happiness
PP High Flow Filter Cartridges
This is one kind of universal high flow filter cartridge. The large diameter with larger filtration area insures to reduce the number of filter cartridges and the dimension of housing required. The long service life and high flow rate result in low investment and less manpower in many applications.
Benefits
Higher filtration area even up to 8m³, higher flow capability.
Higher dirt holding capability, longer service life.
We can meet different application requirement by designing different layers for the filter structure.
Nominal micron rating and absolute micron rating are available.
Applications
Sea water desalination
Oil & Chemical
Steel mill water treatment
Food and beverage
Microelectronics
Power plant water treatment
Machinery and equipment
Material Configuration
Outside Diameter : 6 inch(152mm)
Filter Media : Pleated glass fiber / Pleated depth Polypropylene (PP) / PP Melt blown
Support/Drainage : Polypropylene (PP)
Removal Rating (μm) : 0.5, 1, 3, 5, 10, 20, 25, 50 70 100
Length : 20” (528mm), 40’’ (1022mm), 60” (1538mm)
Seal Material : E = EPDM, B = NBR, V = Viton, S = Silicone
Maximum Operating Temperature:
Pleated Glass Fiber : 121°C
Pleated PP : 80°C
Melt Blown PP : 65°C
Maximum Operation Differential Pressure : 3.0 Bar @ 21°C
Recommended Change out Differential Pressure : 1.8-2.4 Bar @ 20°C
Suggested Maximum Flow of water :
20 inch length : 660 LPM
40 inch length : 1,300 LPM
60 inch length : 1,900 LPM
High Flow Filter Cartridge with Stainless Steel Tin Cage
This is one kind of universal high flow filter cartridge. The large diameter with larger filtration area insures to reduce the number of filter cartridges and the dimension of housing required. The long service life and high flow rate result in low investment and less manpower in many applications, especially used in high temperature and high-Pressure applications.
Benefits
Higher filtration area even up to 8m³,higher flow capability.
Higher dirt holding capability, longer service life.
Meet different application requirement by designing different layers for the filter structure.
Nominal micron rating and absolute micron rating are available.
Applications
Sea water desalination
Microelectronics
Machinery and Equipment
Food and beverage
Oil & Chemical
Power plant water treatment
Material Configuration
Outside Diameter : 6 inch(152mm)
Filter Media : Pleated glass fiber / Pleated depth Polypropylene (PP) / PP Melt blown
Support/Drainage : Polypropylene (PP)
Removal Rating (μm) : 0.5, 1, 3, 5, 10, 20, 25, 50 70 100
Length : 20” (528mm), 40’’ (1022mm), 60” (1538mm)
Seal Material : E = EPDM, B = NBR, V = Viton, S = Silicone
Maximum Operating Temperature:
Pleated Glass Fiber : 121°C
Pleated PP : 80°C
Melt Blown PP : 65°C
Maximum Operation Differential Pressure : 3.0 Bar @ 21°C
Recommended Change out Differential Pressure : 1.8-2.4 Bar @ 20°C
Suggested Maximum Flow of water :
20 inch length : 660 LPM
40 inch length : 1,300 LPM
60 inch length : 1,900 LPM
Glass Fiber High Flow Filter Cartridges
This is one kind of universal high flow filter cartridge. The large diameter with larger filtration area insures to reduce the number of filter cartridges and the dimension of housing required. The long service life and high flow rate result in low investment and less manpower in many applications, especially used in high temperature and high-Pressure applications.
Benefits
Higher filtration area even up to 8m³,higher flow capability.
Higher dirt holding capability, longer service life.
Meet different application requirement by designing different layers for the filter structure.
Nominal micron rating and absolute micron rating are available.
Applications
Sea water desalination
Microelectronics
Machinery and Equipment
Food and beverage
Oil & Chemical
Power plant water treatment
Material Configuration
Outside Diameter : 6 inch(152mm)
Filter Media : Pleated glass fiber / Pleated depth Polypropylene (PP) / PP Melt blown
Support/Drainage : Polypropylene (PP)
Removal Rating (μm) : 0.5, 1, 3, 5, 10, 20, 25, 50 70 100
Length : 20” (528mm), 40’’ (1022mm), 60” (1538mm)
Seal Material: E = EPDM, B = NBR, V = Viton, S = Silicone
Maximum Operating Temperature:
Pleated Glass Fiber : 121°C
Pleated PP : 80°C
Melt Blown PP : 65°C
Maximum Operation Differential Pressure : 3.0 Bar @ 21°C
Recommended Change out Differential Pressure : 1.8-2.4 Bar @ 20°C
Suggested Maximum Flow of water :