Compresesd Air / Gas Filters
Peak Performance, Pure Protection: Compressed Air/Gas Filters for a Healthier Tomorrow
Compressed Air Filter for Sterile Process
Aarvi Energy– IF filter is a wounded depth filter, with end caps, inner and outer guard made from stainless steel. Consisting of a 3-dimensional borosilicate depth media, the IF Filter achieves a void volume of 95%, ensuring a high containment capacity at high flow rates and low differential pressure. During operation, the filter achieves a retention rate of > 99.99998% related to 0.01 µm.
Applications
Aseptic packing
Chemical Industry
Food and beverage
Biotechnology
Dairies
Pharmaceutical
Machinery and equipment
Breweries
Fermentation processes
Water treatment system
Features & Benefits
100 sterilisation cycles guaranteed
Non fibre releasing element
Robust construction
Absolute retention rate of 99.99998% related to 0.01µm
Available in 13 sizes
Stainless steel core and end-caps
Biologically and chemically inert
Meets industry standards
Three-dimensional borosilicate depth filter media
Materials of Construction
Specifications :
Filter media : Borosilicate
Membrane support : Polyester
Inner core : Stainless steel
Outer core : Stainless steel
End caps : Stainless steel
O-rings : Silicone, Buna N, EPDM, Viton
Filtration Area : 494cm² (5,317ft2) per 10” element
Available length : 5-inch, 10-inch, 20-inch, 30 inch
Maximum Differential Pressure : 5bar (73psi), independent of operation pressure of flow direction
Operating Temperature : -20 to 200 ºC (-4 to 392ºF)
Sterilization :
This filter elements are guaranteed for 200 sterilization cycles without loss of integrity.
In-line sterilization with slow speed saturated steam:
max. 121°C (250°F) for 30 minutes
max. 131°C (268°F) for 20 minute
max. 141°C (286°F) for 10 minutes
Autoclave: 125°C (257°F) for 30 minutes
Bacterial Retention : LRV > 7/cm² (1.09in2) for T1 Coliform
Absolute Retention Rate : 99.99998 % related to 0.01µm
Activated Carbon Air / Gas Filters
Activated Carbon absolute-rated activated carbon filters are designed for the removal of oil vapour and other hydrocarbons. These filter elements consist of a two-stage filtration process. All particles are retained within the nanofiber depth filter media, while the activated carbon adsorbs all oil vapors and gaseous hydrocarbons. The filter can achieve residual oil content of < 0.003 mg/m3 with appropriate pre-filtration.
Applications
Chemical and petrochemical
Pharmaceutical
Breathing Air
Packing machines
Prefiltration of sterile filters
Filling machines
Food and beverage
Industrial process
Features and Benefits
High load of activated carbon
Flow distribution at the air inlet
Embedded activated carbon
Depth filter stage of binder-free woven nanofibers
Material Configuration
Specifications :
Filter membranes : Borosilicate nanofibers
Membrane support : Polyamide
Support sleeves : Stainless steel
Adsorption stage : carbon embedded in PUR foam
O-rings : Silicone, Buna N, EPDM, Viton
Support ring : Stainless steel
Operating Temperature : 10 to 40ºC (50 to 104ºF)
Retention Rate : Residual oil content of < 0,003 mg/m³, with pre-filtration
Recommended Pre-Filtration : Residual oil content < 0,01 mg/m³
Initial differential pressure at nominal flow : 0.07bar (1.02psi)